LOG-A8 1100T Variable Pump Injection Molding Machine

high quality

RFQ

Description

Specifications of LOG1100

INJECTION		LOG1100
INJECTION		A	B	C	D
Shot volume	cm³	4123	4989	5938	6968
Shot weight (ps)	G	3751	4540	5403	6340
Shot weight (ps)	oz	133	161	191	225
Max injection rate	cm³/s	702	850	1010	1186
Screw diameter	Mm	100	110	120	130
Plasticizing rate	Kg/h	380	453	532	578
Injection pressure	Mpa	220	182	153	130
Screw L:D ratio		22:1	22:1	20.2:1	18.6:1
screw speed	r/min	0-95
CLAMPING
Clamping force	Kn	11000
Opening stroke	Mm	1150
Platen size	MmXmm	1650*1650
Space between tie bars	MmXmm	1150*1100
Mold thickness (Min--Max)	Mm	450-1200
Hydraulic ejection stroke	Mm	350
Hydraulic ejection force	Kn	270
POWER UNIT
Hydraulic system pressure	Mpa	17.5
Pump motor	Kw	45+45
Heating capacity	Kw	68.45
Number of temp control zones		6+ (nozzle)
GENERAL
Dry-cycle time	sec	10
oil tank capacity	L	2300
Machine dimensions	Mxmxm	12.52.83.5
Machine weight	kg	60000

Clamping Unit

1 .Toggle adopting the conjoined structure, improving the hardness of toggle, ensuring the uniform of toggle manufacture-size, minimizing the gap between pipe and pin, improve the accuracy and application life of toggle.

2.First clamping platen using the box-type structure design, (thicken the thickness of platen, improving the hardness of platen, efficiently minimizing the deform caused by the force of tie bar.

3.Unique third-platen flange design, when the third- platen deforms by the pressure, by the support of flange and tie bar. a reverse torque will minimizing the deform of the third-platen.

4. Adopting gear-adjusting ring with high-precision, large-scale transfer and compact structure to facilitate customer adjusting (the mold thickness in manual or automatic mode.

5.Steel bush in clamping unit adopts new structure, arrange rational holes of graphite to improve the effect of steel bush lubrication and the wear-resistance, reduces the usage of lubrication oil.·


Conjoined toggle	High-hardness Platen	Platen Flange	Gear-adjusting ring	Graphite Bush

Injection Unit

1 .Injection unit adopts double-cylinder design, more higher injection pressure, more simpler structure and lower malfunction rate.

2. Enlarged-cylinder, adopting two-cylinder design, effectively prevent the adhesive- material leaking phenomenon caused by the machine vibration or other reasons while the nozzle is under high-speed operation.

3. Adopting graphite bush, improving the wear- resistance, reducing the frequency of using lubrication oil, effectively improve the cleanness of the injection part.

4.Injection cylinder adopts low-frictional seals, improving the response rate and improve the stability under the complicated processes of injection.

5.Bridge-style design, for different L/D ratio plasticizing parts.